1/4 BSPT (Rc Series Pipe Taper) Chrome Alloy Tap Bottoming – Bordo

• 1/4 BSPT (Rc Series Pipe Taper) Chrome Alloy Tap – Bottoming
• Chrome Alloy BSPT Bottoming Hand Tap.
• Used as thread chasers to clean an existing thread.
• They can also be used to create a new female thread in non-ferrous metals and plastics.
• Chrome alloy taps are not suitable for creating precision, safety or critical threads.
• British Standard Pipe Taper (RC Series Pipe Taper) is based on the Whitworth thread form – a symmetrical V-thread with an angle of 55°.
• BSPT has been widely adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
• The thread diameter increases along the length of the thread allowing the coupled pipes to form a seal when torqued as the flanks of the threads compress against each other.
• The taper is "1 to 16", meaning that for each 16 mm increase in the distance from the end, the diameter increases by 1 mm.
• Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.

Specifications

• Pack Qty: 1
• Diameter (inch): 1/4
• Drill Diameter (mm): 10.8
• Lead: Bottoming
• Overall Length (mm): 62
• Pitch (tpi): 19
• Thread Form: BSPT

Product Code : 4248-1/4B

1/4 BSPT (Rc Series Pipe Taper) Chrome Alloy Tap Bottoming - Bordo quantity

Add to cart