8 x 1mm MF Bottoming Chrome Tap – Bordo
- 8 x 1mm MF Bottoming Chrome Tap
- Chrome Alloy Metric Fine Bottoming Hand Tap.
- Used as thread chasers to clean an existing thread.
- They can also be used to create a new female thread in non-ferrous metals and plastics.
- Chrome alloy taps are not suitable for creating precision, safety or critical threads.
- Metric Fine angle of thread is 60 degrees.
- The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
- Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
- The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Specifications
- Pack Qty: 1
- Diameter (mm): 8
- Drill Diameter (mm): 7.1
- Lead: Bottoming
- Overall Length (mm): 69
- Pitch (mm): 1
- Thread Form: Metric Fine
$11.95 Incl. GST ($10.86 Excl. GST)
Ships the next business day from our Horsham store
Posted Australia-wide in a satchel for $17.95, or FREE on orders over $199
Or pick up free from our store at 60A Darlot Street, Horsham
Related products
- 8 x 1mm MF Bottoming Chrome Tap
- Chrome Alloy Metric Fine Bottoming Hand Tap.
- Used as thread chasers to clean an existing thread.
- They can also be used to create a new female thread in non-ferrous metals and plastics.
- Chrome alloy taps are not suitable for creating precision, safety or critical threads.
- Metric Fine angle of thread is 60 degrees.
- The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well.
- Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
- The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
- Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
- Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Specifications
- Pack Qty: 1
- Diameter (mm): 8
- Drill Diameter (mm): 7.1
- Lead: Bottoming
- Overall Length (mm): 69
- Pitch (mm): 1
- Thread Form: Metric Fine
Join the HB Crew
Member-only deals, exclusive offers, competitions and giveaways, straight to your inbox.
Approved by Ned, our Head of HR.
No spam. Unsubscribe any time.